How to configure IP address from Cisco CLI: Assigning an IP Address to CISCO Aironet 2600

1. Connect the PC's serial port to the AP via the CLI interface cable. Run a terminal

program set to 9600 baud.

2. At the prompt, type enable.

3. Type the password (default password is Cisco).

4. Type the command configure terminal.

5. Type the command interface BVI1.

6. Enter the IP address. Type ip address <ip address> <net mask>.

7. Enter the default gateway address. Type default-gateway <ip address>

8. Type end and then type write mem to save configuration.

The rest of the configuration can easily be done through the browser interface. Log into the AP via a web browser using the IP address assigned in the above step.

:http://intermec.custhelp.com/app/answers/detail/a_id/10590/~/how-to-configure-ip-address-from-cisco-cli%3A-assigning-an-ip-address-to-1242ag